[스크랩] DYNACORD_DSP244
▣ 특징
- 48비트 알고리즘과 24비트의 AD/DA 전환기능 및 115dB을 초과하는 다이나믹 레인지를 제공하는 DSP244는 디지털 고출력 시피커의 조절과 신호처리에 새로운 표준을 결정한다.
- 2-in-4 설계와 115dB을 초과하는 다이나믹레인지를 가진 DSP244는 어떤 액티브 2-, 3- 또는 4-way 오디오 시스템 설치시 이상적인 콘트롤이다.
- 각각의 입력신호는 개별적으로 파라메트릭 EQ, Lo/Hi shelving EQs, 또는 Lo/hi 컷으로 사용될 수 있는 5개의 EQ필터에 의해 영향을 받을 수 있다.
- 50개의 DYNACORD 고출력 스피커 시스템 preset 외에 30개의 사용자 preset을 저장할수 있다.
- RS-232와 미디 인터페이스가 들어있어 최대 16대까지 DSP에 연결할 수 있다.
▣ 사양
Mains Voltage Safety Class Inputs Nominal Input Voltage Input Impedance Common Mode Rejection A/D Conversion Outputs 4 x XLR OUT, electronically balanced Nominal Output Voltage Output Impedance D/A Conversion Frequency Response 20 Hz - 20 kHz (-0.5 dB) S/N Ratio 115 dB (typical) THD without transformer < 0.01 % X-over 6, 12, 18, 24 dB/oct. slope; Butterworth, Filters 26 parametric equalizers Compressor / Limiter 4 digital compressors / 4 digital limiters Delay 3 master delays (2 ms - 900 ms) Data Format 24-bit linear A/D - D/A conversion, Sample Rate 48 kHz MIDI IN / OUT / THRU data dump, master / slave operation / RS-232 data dump, remote control, firmware upgrade Display 122 x 32 dots, graphic LC - Display with LED Dimensions 483 x 43.6 x 374 (W x H x D in mm), 19", 1 RU Weight 5 kg Protection Function password lock Accessories PA 1 fiber glass - cover lid 1 RU Options RS-485 Interface (NRS 90247)
Power Consumption
20W
transformer optional, 2 x XLR OUT (Direct Out)
Max. Input Voltage
24.5 V / + 30 dBu
linear phase
Max. Output Voltage
8.7 V / + 21 dBu
Min. Load Impedance
600 Ω
THD with transformer
< 0.05 %
Bessel, Linkwitz-Riley
low-shelving equalizer, switchable for LPN
(Lowpass-Notch-Filter)
operation, hi-shelving equalizer, switchable to 6 / 12 dB slope,
lo-cut filter (B-6 alignment switchable),
hi-cut filter, all-pass filter
4 channel delays (0 ms - 900 ms)
delay - increment 21μsec
48-bit processing
remote control
- backlight
Contact Closure Interface (NRS 90246)
Input Transformer (NRS 90244)