
|
K-6 |
Compact Bi-Amplifier Line Array Element Two-Way System High Direcitvity |
Compact Bi-Amplifier Line Array Element Two-Way System High Direcitvity
Ultra compact two-way full range line array System
- Ultra compact size, light weight
- Planar Ribbon 3.5"x 4 and 70°x40°horn Titanium Compression Driver
- FCF 6.5" High Efficiency ultra low distortion woofers
- Wide horizontal caverage of 100°
- High efficiency
- Full-range capability
- Integrated rigging system for flown or ground-stacked arrays
Application
- Arenas
- Convention Centers
- Large Ballrooms
- Theatres
- Music Pavilions
- Auditoriums
- Churches
The K6is an ultra compact, two-way full range line array system designed for an wide range of venues where high fidelity sound and outstanding intelligibility is required.
The system contains FCF 6.5-inch High Efficiency ultra low distortion cone speakers and RCF F-800S,1-inch Throat/Pure Tltanium Compression Driver The systemsare designend to be used in multiples with a minimal configuration of four and on hi unit. Up to 22 Units can be used to achieve extreme high levels needed for larger venues. An optional KB-124 subwoofer can be added for increased low frequency response. The integrated rigging system allows quick and easy flying or ground stacking. Arrays may be built straight or curved in various angular to obtain the desired vertical coverage. The fact that the K-6 is ultra compact and light reduces manpower and transport. Whencoupled with KB-124 or K-6A gives audio companies a flexible, plug and play system for an wide range of applications from the smallest venue to a concert-level sound.
Specification
Line Array Element
Frequency Response |
± 3 dB)250 ~ 5.5kHz |
- Frequency Range |
-10 dB)200 ~ 7kHz |
- Super High Cover Range |
Full Cover Range |
- Maximum Peak Output |
125㏈ to 130㏈, 1m frequence/ bandpass dependent |
- Recommended singnal |
processing : dbx-480, BSS-366, XTA-226 supported |
Transducer Sections
- Low Frequency |
200Hz-2KHz(L6L380), 190mm(6.5in), High Efficiency Drive, Direct Cooled |
- High Frequency |
Four F-800S Planar Ribbon 3.5" x 4 Driver |
Crossover Frequency |
DSP Settings Provided HI 2KHz - 5.5KHz / LOW 250Hz - 2KHz |
Bandpass Nominal Impedance |
HI 8Ω / LOW 8Ω |
Input Power Rating |
350w(800w peak) 2ours |
- LF |
200w (Peak 500w) 8ohm |
- HF |
150w (Peak 300w) 8ohm |
Bandpass sensitivity |
125㏈, 1w,@ 1m(3.3ft) |
- LF |
95dB SPL (200-2KHz) |
- HF |
105dB SPL (2.5KHz-6khZ) | |